A-Z index

SARBIO® 5101 is a low viscosity, monofunctional monomer that promotes adhesion to challenging substrates.

SARBIO® 5102 is an excellent reactive diluent for oligomers. The chemistry produces polymers through free radical curing that have a high glass transition temperature.

SARBIO® 5106 is a monofunctional monomer with a long chain hydrophobic backbone. It may act as a bubble breaker.

SARBIO® 5201 is an acrylate monomer that exhibits low odor and high reactivity. It is useful in applications, such as coatings and digital and screen inks, and where weathering resistance is needed.

SARBIO® 6101 is a low volatility monofunctional monomer with a hydrophobic backbone.

SARBIO® 6105 is an excellent reactive diluent for oligomers. It produces polymers through free radical curing that have a high glass transition temperature.

SARBIO® 7106 is an acrylated vegetable oil oligomer developed for energy-curable ink and pigmented coating systems. It imparts hydrophobicity, good flow, and pigment dispersability to litho or offset inks.

SARBIO® 7107 is a difunctional, acrylated vegetable oil oligomer that offers pigment wetting characteristics and produces flexible, well-adhering cured films.

SARBIO® 7202 is an acrylated polyester oligomer that is used in UV-curable coatings and inks, including flexographic, screen, and lithographic inks.

SARBIO® 7204 is a hexafunctional acrylated polyester oligomer that demonstrates good pigment wetting and fast cure response. It is recommended for use in lithographic and flexographic ink formulations, as well as abrasion resistant coatings.

SARBIO® 7407 is a urethane acrylate oligomer that offers superior physical properties and fast cure rates. SARBIO® 7407 has excellent resistance to polar solvents and has good water, acid, and base resistance.

SARBOX® SB401 is a highly functional, carboxylic acid and anhydride containing methacrylate oligomer, blended in ethyl-3-ethoxy propionate (EEP) solvent. It offers fast cure speed and excellent copper adhesion. SARBOX® SB401 has a high acid number for alkali strippability. SARBOX® SB401 also provides good solvent and acid resistance and excellent high gloss aqueous development.

SARBOX® SB510E35 is a moderately functional, carboxylic acid and anhydride containing methacrylate oligomer blended in SR454, ethoxylated trimethylolpropane triacrylate monomer. Reactive solids are 100%. It offers excellent cure speed, excellent adhesion to metal and plastics, good wetting and flow characteristics. SARBOX® SB510E35 also has excellent thin film adhesion to electrocoated steel.

SARET® SR500 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR515 coagent is a trifunctional, low color, low staining, scorch retarding coagent that contains nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties.

SARET® SR521 coagent is a difunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the products improves mechanical and performance properties.

SARET® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast cure, while maintaining good scorch safety. SARET SR522D contains a safe, non-nitroso scorch retarder and exhibits low color and low staining.

The Sartomer® product line has one of the broadest ranges of acrylate monomers, oligomers, and specialties available.These products use UV, EB, LED, peroxide and amine cure technologies for the coatings, inks, adhesives, composites, 3D printing, construction markets, dedicated to many high performance consumer and industrial applications.

The Sartomer^® product line offers a wide range of methacrylate monomers and oligomers. Methacrylate monomers are used in applications ranging from chemical intermediates to composites to adhesives and sealants to elastomers and more. In addition to diluency, these monomers impart a variety of key performance characteristics, including heat resistance, chemical resistance, and adhesion. Methacrylate oligomers provide hardness, chemical resistance, and other properties critical to coatings and adhesives.

SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end application.

SpeedBlock DP74 is a fluorescent whitening agent, with excellent stability in low pH systems, for use in ink and coating applications. SpeedBlock DP74 is used in warm white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock 74 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock 74 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements.

SpeedBlock OB-184 is a fluorescent whitening agent, with excellent chemical and thermal stability, for use in ink and coating applications. SpeedBlock OB-184 is used in white and pastel tones where the degree of whiteness of the paint/ink needs intensifying. SpeedBlock OB-184 will mask the yellow self colour of some formulations and will increase the deep tone of blue/black inks. SpeedBlock OB-184 is recommended for use at concentrations between 0.02 - 5.0%. The actual use level chosen depends on the particular application and end user requirements.

SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application.

SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application.

SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions and end application.

SpeedBlock UV-92 is a blend of hindered amine light stabilisers (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock UV-92 is ideally suited for exterior coatings and is typically used at 0.5 - 2.0% depending on the processing conditions and end application.

SpeedCure 2-ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure 2-ITX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 2022 is a liquid formulation of photoinitiators, with absorption maxima at 243 and 280 nm. SpeedCure 2022 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 210 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 210 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 2100 is a liquid formulation of photoinitiators, with absorption maxima at 228, 272 and 368 nm. SpeedCure 2100 provides excellent depth curing for a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 2959 is a water dispersible Norrish Type I photoinitiator from the hydroxyacetophenone family, with absorption maxima at 219 and 275 nm. SpeedCure 2959 provides low yellowing and surface cure when used at 0.5-5Iwt% in UV curable formulations.

SpeedCure 4265 is a liquid formulation of photoinitiators, with absorption maxima at 240, 273 and 380 nm. SpeedCure 4265 provides balanced curing in a broad range of applications when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 500 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 500 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 510 is a formulation of Norrish Type I and Norrish Type II photoinitiators from the hydroxyacetophenone and benzophenone families, with an absorption maximum at 249 nm. SpeedCure 510 provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure 7010 is a polymeric Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 312 and 383 nm. SpeedCure 7010 provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-8 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 7010-L is a 40% active liquid polymeric Norrish Type II photoinitiator of the polymeric thioxanthone family. SpeedCure 7010-L provides long wavelength sensitisation of appropriate photoinitiators, depth cure, low odour and low migration when used at 0.1-10 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure 73 is a liquid Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 73 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 84 is a Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 244 nm. SpeedCure 84 provides low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 937 is cationic photoinitiator of the iodonium hexafluoroantimonate family, with absorption maximum at 230 nm. SpeedCure 937 provides high reactivity and high solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 938 is cationic photoinitiator of the iodonium hexafluorophosphate family, with absorption maximum at 241 nm. SpeedCure 938 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 939 is cationic photoinitiator of the iodonium borate family with absorption maximum at 258 nm. SpeedCure 939 provides high reactivity and solubility in cationic systems when used at 0.5-5 wt% in UV curable formulations and LED curable formulations when sensitised with thioxanthones.

SpeedCure 976 is a 50% active liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations.

SpeedCure 976D is liquid cationic photoinitiator of the sulfonium hexafluoroantimonate family in a reactive diluent. With absorption maxia at 230 and 295 nm, SpeedCure 976D provides high reactivity in cationic systems when used at 0.5-5 wt% in UV formulations.

SpeedCure 976s is cationic photoinitiator of the sulfonium hexafluoroantimonate family, with absorption maxima at 230 and 295 nm. SpeedCure 976s provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations.

SpeedCure 992 is a 40% active liquid cationic photoinitiator of the sulfonium hexafluorophosphate family, with absorption maxima at 230 and 295 nm. SpeedCure 992 provides high reactivity in cationic systems when used at 0.5-5 wt% in UV curable formulations.

SpeedCure BCIM is a photoinitiator of the hexaaryl bisimidazole (HABI) family, with absorption maximum at 264 nm. SpeedCure BCIM produces highly reactive species when used at 0.1-5 wt% and combined with appropriate co-initiators such as, LCV or thiols in UV and LED curable formulations.

SpeedCure BEDB is a liquid amine synergist of the aminobenzoate family. SpeedCure BEDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure BKL is a Norrish Type I photoinitiator from the acetophenone family, with an absorption maximum at 253 nm. SpeedCure BKL provides high reactivity and surface cure when used at 0.5-5wt% in UV curable formulations.

SpeedCure BMS is a Norrish Type II photoinitiator of the benzophenone family, with absorption maxima at 246 and 315 nm. SpeedCure BMS provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure BP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 252 nm. SpeedCure BP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure BPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 281, 365 and 395 nm. SpeedCure BPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure CPTX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 257, 314 and 389 nm. SpeedCure CPTX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure DETX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 261, 291 and 386 nm. SpeedCure DETX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure DMB is an amine synergist of the aliphatic amine family. SpeedCure DMB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EAQ is a Norrish Type II photoinitiator of the anthraquinone family, with absorption maxima at 256 and 327 nm. SpeedCure EAQ provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% in UV and LED curable formulations.

SpeedCure EDB is an amine synergist of the aminobenzoate family. SpeedCure EDB generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EHA is a liquid amine synergist of the aminobenzoate family. SpeedCure EHA generates active species when used at 2-8 wt% in combination with Norrish Type II photoinitiators and reduces oxygen inhibition in UV and LED curable formulations.

SpeedCure EMK is a Norrish Type II photoinitiator of the benzophenone family and an amine synergist, with absorption maxima at 250 and 378 nm. SpeedCure EMK provides high reactivity and depth cure when used at 0.5-5 wt% and combined with an amine synergist in highly pigmented UV and LED curable formulations.

SpeedCure ITX is a Norrish Type II photoinitiator of the thioxanthone family, with absorption maxima at 259 and 383 nm. SpeedCure ITX provides long wavelength sensitisation of appropriate photoinitiators and depth cure when used at 0.1-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure MBB is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 246 nm. SpeedCure MBB provides surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure MBF is a liquid Norrish Type II photoinitiator of the benzoylformate family, with an absorption maximum at 244 nm. SpeedCure MBF provides very low yellowing and surface cure when used at 0.5-5 wt% in UV curable formulations.

SpeedCure MBP is a Norrish Type II photoinitiator from the benzophenone family, with absorption maximum at 259 nm. SpeedCure MBP provides high reactivity and surface cure when used at 0.5-5 wt% and combined with an amine synergist in UV curable formulations.

SpeedCure PBZ is a Norrish Type II photoinitiator of the benzophenone family, with an absorption maximum at 290 nm. SpeedCure PBZ provides high reactivity, surface cure and depth cure when used at 0.5-5 wt% and combined with an amine synergist in UV and LED curable formulations.

SpeedCure PDO is a Norrish Type I photoinitiator from the oxime ester family, with absorption maximum at 259 nm. SpeedCure PDO provides high reactivity, low yellowing and low volatiles when used at 0.5-5 wt% in UV formulations for electronics applications.

SpeedCure TPO is a Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 267, 298 and 380 nm. SpeedCure TPO provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure TPO-L is a liquid Norrish Type I photoinitiator from the phosphine oxide family, with absorption maxima at 274, 290 and 370 nm. SpeedCure TPO-L provides high reactivity and depth cure when used at 0.5-5 wt% in UV and LED curable formulations.

SpeedCure VLT is a titanocene photoinitiator with absorption maxima at 395 nm and 470 nm. SpeedCure VLT provides high reactivity and depth curing when used at 0.5-5% in UV, LED and visible light curable formulations. SpeedCure VLT also acts as an effective sensitizer for diaryliodonium type cationic photoinitiators and can therefore be used to promote cure of cationic formulations with visible light.

SpeedCure XFs is a formulation of difunctional and monofunctional Norrish Type I photoinitiators from the hydroxyacetophenone family, with an absorption maximum at 252 nm. SpeedCure XFs provides low yellowing, surface cure and increased reactivity when used at 0.5-5 wt% in UV curable formulations.

SpeedCure XFs01 is a difunctional Norrish Type I photoinitiator from the hydroxyacetophenone family, with an absorption maximum at 258 nm. SpeedCure XFs01 provides low yellowing, surface cure and high reactivity when used at 0.5-5 wt% in UV curable formulations.

SR150 is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance.

SR170 is 2-Hydroxyethyl Methacrylate used in UV/EB adhesives and coatings applications.

SR191B is a monofunctional methacrylate used in UV/EB applications.

SR203 is a low viscosity, polar monofunctional monomer which contains a cyclic group. It promotes adhesion to numerous substrates.

SR205 is a high boiling monomer with low vapor pressure which is used in free radical polymerization.

SR206 is a colorless, high boiling difunctional monomer for use in free radical polymerization.

SR209 is a low viscosity, non-corrosive, difunctional monomer with low vapor pressure and fast cure response for use in free radical polymerization.

SR210A is a low viscosity difunctional monomer with low vapor pressure and fast cure response for use in free radical polymerization.

SR212B is a low viscosity difunctional monomer offering good stain resistance and solvency.

SR213 is a low viscosity, difunctional monomer offering high solvency.

SR214 is a low viscosity, difunctional monomer offering high solvency.

SR217 is a low viscosity aliphatic monofunctional monomer for use in UV/EB coating and ink formulations. SR217 improves adhesion to plastics, metals, and other difficult substrates.

SR218A is a low viscosity monofunctional monomer for use in UV/EB coating, inks, and adhesive formulations. SR218A improves adhesion to plastics, metals, and other difficult substrates.

SR230 is a high boiling monomer with low vapor pressure which is used in free radical polymerization.

SR231 is a high boiling monomer with low vapor pressure which is used in free radical polymerization.

SR238 is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvency for use in free radical polymerization.

SR238B is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvency for use in free radical polymerization. Also available in a toluene-free version.

SR239 is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good solvency for use in free radical polymerization.

SR247 is a low viscosity, difunctional monomer which provides chemical resistance and high reactivity.

SR248 is a low viscosity, difunctional monomer which provides chemical resistance and high reactivity.

SR252 is a water soluble difunctional monomer that produces soft, flexible films.

SR256 is a slightly water dispersible, monofunctional monomer which acts as a reactive diluent.

SR257 is a monofunctional monomer with a long chain hydrophobic backbone. It may act as a bubble breaker.

SR259 is a low volatility monomer which produces soft, flexible free-radically cured flexible films.

SR261B is a difunctional methacrylic monomer designed for use as a reactive diluent in free radical polymerization systems or as a polymer crosslinker.

SR262 is a low viscosity, fast curing monomer with low volatility, a hydrophobic backbone, and good flexibility when used in free radical polymerization.

SR268 is a low volatility, difunctional monomer.

SR278 is a monofunctional acrylate ester that functions as a low volatile, low viscosity diluent for UV/EB-curable adhesives, photopolymer printing plates, and ink jet inks.

SR285 is a low viscosity, polar, monofunctional monomer, which contains a cyclic group. It promotes adhesion to numerous substrates.

SR295 is a tetrafunctional monomer.

SR297 is a difunctional monomer offering good stain resistance and solvency.

SR297F is a difunctional coagent offering good stain resistance and solvency. It also offers improved mechanical properties in peroxide-cured elastomers.

SR306F is a low volatility, low viscosity monomer for use in free radical polymerization. Also available in a toluene-free version.

SR313A is a low volatility monofunctional monomer with a long chain aliphatic hydrophobic backbone. SR313B and SR313D are also available as C12 C14 alkyl methacrylates.

SR313B is a low volatility monofunctional monomer with a long chain aliphatic hydrophobic backbone. SR313A is available as lauryl methacrylate. SR313D is also available as a C12 C14 alkyl methacrylate.

SR324 is a monofunctional monomer with a long chain hydrophobic backbone. It may act as a flexibilizer.

SR335 is a low volatility monofunctional monomer with a long chain aliphatic hydrophobic backbone.

SR339 is a low volatility monofunctional, aromatic monomer which offers good adhesion properties.

SR340 is a low volatility monofunctional, aromatic monomer which offers good adhesion properties.

SR344 is a low skin irritation, water soluble monomer which produces soft, flexible free-radically cured flexible films.

SR348 is a low volatility monomer used in free radical polymerization.

SR349 is a low skin irritation, low odor, low volatility monomer used in free radical polymerization. It has a hydrophobic backbone for complete alkali solubility.

SR350 is a low volatility trifunctional monomer offering fast cure response in free radical polymerization.

SR351 is a low viscosity, low volatility monomer which offers fast cure response during free-radical polymerization.

SR355 is a low skin irritation tetrafunctional monomer offering fast cure response and a high crosslink density upon curing.

SR368 is a white, crystalline, solid triazin compound with a melt point of 52-54° C which is used in free radical polymerization.

SR368D is a clear liquid triazin compound which is used in free radical polymerization.

SR395 is a monofunctional, hydrophobic monomer.

SR399 provides abrasion resistance, flexibility with hardness, and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR399LV combines abrasion resistance and flexibility with hardness and fast cure response for ultraviolet and electron beam curing. It is a low skin irritation monomer.

SR406 is a difunctional cycloaliphatic acrylate monomer that offers fast cure rates and produces hard, durable coatings with good clarity and adhesion to diverse substrates.

SR415 is a low skin irritation, water soluble monomer for use in free radical polymerization. SR415 yields flexible, low shrinkage films.

SR420 is a very low viscosity monofunctional monomer that brings high Tg and low shrinkage to UV/EB inks, adhesives, and plastic coatings.

SR421A is a low viscosity, monofunctional methacrylate monomer containing a light stable cyclic group. It has excellent solvency characteristics and good adhesion to a variety of substrates. It demonstrates improved thermal stability.

SR423 is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing which have a high glass transition temperature.

SR440 is a low viscosity, monofunctional monomer which acts as a reactive diluent.

SR444 contains a pendant hydroxyl group and is a low volatility, fast curing monomer for use in free radical polymerization.

SR454 is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR454LR NS, 3 mole ethoxylated trimethylolpropane triacrylate, is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR480 is a low odor, low volatility monomer used in free radical polymerization.

SR484 is a monofunctional monomer with a long chain hydrophobic backbone. It may act as a bubble breaker.

SR489Dis a low viscosity, low odor, low skin irritation, monofunctional acrylate with low ester content.

SR492 is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR493D is a low volatility, low odor, and low skin and eye irritation monomer for use in UV/EB polymerization.

SR494 is a heat resistant, fast curing tetrafunctional monomer for use in UV/EB polymerization. It is a low skin irritation monomer.

SR495B is a low skin irritation, low volatility, low odor, monofunctional monomer for use in UV/EB or cationic curing.

SR499 is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR501 is a low skin irritation, fast curing mon-omer for use in free radical polymerization

SR502 is a low skin irritation, fast curing monomer for use in free radical polymerization.

SR504 is a low odor, low volatility, low skin irritation monomer for use in UV/EB polymerization.

SR506 is an excellent reactive diluent for oligomers. The cyclic group produces polymers through free radical curing that have a high glass transition temperature.

SR508 is an excellent low viscosity, economical diluent that can replace hexane diol diacrylate in most applications.

SR511 is a 75% solids monomer that reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne industrial baking coatings crosslinked with amino resins. SR511 significantly improves gloss and clarity of emulsion-based coatings, and increases the open-time of waterborne systems.

SR512 reduces VOCs and increases solids levels, while maintaining film properties of solvent-based and water-borne industrial baking coatings crosslinked with amino resins. SR512 significantly improves the gloss and clarity of emulsion-based coatings, and increases the open-time of waterborne systems.

SR531 is a low viscosity monofunctional acrylate monomer that is used in a variety of UV/EB-cured applications, including inks, wood coatings, stereo-lithography, and photopolymer printing plates. SR531 is tough, flexible, non-yellowing, and imparts adhesion to a variety of substrates.

SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyesters, and polyvinyl chloride.

SR534 is a multifunctional acrylate ester anti-reversion coagent for use in sulfur-cured elastomers. Aiding in high temperature curing, with minimal effect on scorch and cure rates. It also minimizes heat buildup and has no impact on formulated elastomer properties. It experiences low property loss during extended vulcanization and/or aging. It's compabitle with NR, IR, NBR, SBR, BR, EPDM, CIIR.

SR534D is a multifunctional acrylate ester anti-reversion coagent for use in sulfur- cured elastomers. SR534D is a dry liquid concentrate (DLC). It experiences low property loss during extended vulcanization and/or aging. SR534D is also available as a 100% active liquid (SR534).

SR540is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance.

SR541 is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance.

SR542 is a low volatility monomer used in free radical polymerization. It provides a good hydrophobic and hydrophilic balance.

SR545 is a monofunctional monomer that is suited to peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics.

SR550 is a monofunctional monomer that features excellent wetting, water solubility, low Tg, and fast surface cure. It is recommended as a versatile chemical intermediate for coatings and polymer modification.

SR551 is a monofunctional monomer that features excellent wetting, high flexibility, low Tg, and fast surface cure.

SR552 is a monofunctional methacrylate monomer that features excellent wetting, water solubility, low Tg, and fast surface cure. It is recommended as a versatile intermediate for coatings and polymer modification.

SR553 is a monofunctional acrylate monomer that features excellent wetting, high flexibility, low Tg, and fast surface cure.

SR561 offers reduced skin irritation, excellent flexibility, and improved compatibility with epoxy and urethane-based coating systems.

SR563 is a monomer that offers reduced skin irritation and improved flexibility over hexanediol diacrylate.

SR564 is a monomer which offers reduced skin irritation and high utility in printing and coating applications.

SR587 is a long chain aliphatic monomer that is free radical curable and suited to applications such as acrylic polymers, hydrophobic coatings, and plastic coatings.

SR588 is a long chain aliphatic monomer that is free radical curable and suited to applications such as acrylic polymers, hydrophobic coatings, and plastic coatings.

SR590 is a monomer that possesses a high liquid refractive index and flexibility. The monomer is suited for applications where refractive index matching, adhesion, and flexibility are required.

SR595 is an acrylate monomer that exhibits low odor with high reactivity. SR595 is useful in applications, such as coatings and digital and screen inks, where outdoor weathering resistance is needed.

SR601 is a low skin irritation, low odor, low volatility monomer used in free radical polymerization. It has a hydrophobic backbone for complete alkali solubility.

SR602 is a low skin irritation, low odor, low volatility monomer used in free radical polymerization. It has a hydrophobic back-bone for complete alkali solubility.

SR603 OP is a water soluble difunctional monomer that produces soft, flexible films.

SR610 is a low skin irritation, water-soluble monomer that produces soft, flexible free-radically cured flexible films.

SR611 is an alkoxylated acrylate monomer that offers reduced skin irritation potential and excellent adhesion to plastics, particularly PVC and polycarbonate. SR611 demonstrates good pigment wetting in screen and offset printing systems. It is also effective in promoting intercoat adhesion.

SR614 A is a low odor, low volatility, low skin irritation monomer for use in free radical polymerization.

SR644 produces flexible films and is used in adhesives, sealants, plastisols, and waterborne coatings.

SR730 is a monofunctional monomer developed for peroxide-cured coatings, adhesives, sealants, and emulsion or solution acrylics.

SR740A is a water solution of polyethylene glycol 1000 dimethacrylate. SR740A is used in free radically cured applications, including adhesives, sealants, coatings, and elastomers.

SR833S is a low viscosity difunctional acrylate monomer that is polymerized by free radicals. It can be used in a variety of UV/EB-cured applications where flexibility and adhesion are required. SR833S also demonstrates good firm toughness and weathering characteristics.

SR834 is a difunctional methacrylate used in UV/EB/LED and peroxide-cured adhesives and composites applications.

SR9003B is a low viscosity, low skin irritation monomer for use in free radical polymerization.

SR9009 is a trifunctional methacrylate having excellent adhesion and fast cure response. Adhesion promoter at 5-10%

SR9011 is a trifunctional methacrylate monomer that provides exceptional adhesion to metal substrates. SR9011 is recommended for use in peroxide cured coatings, sealants, and PVC-based plastisols. Usage levels of 5% to 10% by weight are recommended.

SR9012 is an acrylate version of SR9011. SR9012 offers the same adhesion promoting properties as SR9011; however, due to its acrylate functionality, SR9012 demonstrates a significantly faster cure response.

SR9020 is a trifunctional monomer offering low viscosity, good flexibility, fast curing, and excellent hardness.

SR9035 is a water soluble, low skin irritation monomer for use in free radical polymerization. SR-9035 yields flexible, low shrinkage films.

SR9036 is a low skin irritation, low odor, low volatility monomer used in free radical poly merization. It is water soluble.

SR9038 is a low skin irritation, low odor, low volatility monomer used in free radical polymerization. It is water-soluble.

SR9045 is an acrylate ester that demonstrates good pigment wetting, solvent resistance and flexibility in radiation curable ink and coating applications. SR9045 is particularly suited to plastic Substrates.

SR9050 is a monofunctional adhesion promoting monomer that provides exceptional adhesion to metal substrates, including aluminum, brass, tin-free steel and steel. SR9050 is designed for UV/EB cured inks and coatings. Due to its high acid value this product is not recommended for use in formulations containing tertiary amines. Usage levels of 3% to 7% by weight are recommended. Equivalent weight = 177.

SR9051 is a trifunctional version of SR9050. SR9051 offers the same adhesion promoting properties as SR9050; however, due to its trifunctionality, SR9051 provides faster cure response and greater hardness than SR9050. As with SR9050, SR9051 is not recommended for use in formulations containing tertiary amines. Usage levels of 3% to 7% by weight are recommended. Equivalent weight = 163.

SR9053 is a trifunctional acid ester that enhances adhesion of adhesive and coating formulations to metal, plastic, rubber, and glass. SR9053 is not recommended for use with amines. Equivalent weight = 177.

SR9054 is an acid-based adhesion promoter for metal, plastic and laminated foils. Equivalent weight = 177.

SR9075 is an alkoxylated lauryl acrylate monomer. SR9075 demonstrates good pigment wetting, flexibility, and cure speed in radiation curable ink, coating, and adhesive applications. SR9075 is particularly suited to plastic substrates.

SR9087 is an alkoxylated phenol acrylate monomer. SR9087 demonstrates good pigment wetting and surface cure speed in radiation curable ink, coating, and adhesive applications. It also imparts good hardness, without sacrificing flexibility.

SR9209A is a low viscosity, low skin irritation monomer for use in free radical polymerization.